KODAK ADVANTIX F620 Zoom Camera
User's Guide
Getting Started

Attaching the strap

1. Insert one end of the strap under the strap post and pull it up through the other side.
2. Thread the longer end of the strap through the shorter loop.
3. Pull the strap tight.

NOTE: You can use the knob on the clasp of the camera strap to actuate the buttons on the camera.

Loading the battery

This camera uses one 3V lithium KODAK KCR2 Battery (or equivalent) that supplies power for all camera operations.

1. Slide the battery door and lift to open.

   

   Before you remove the old battery, turn off the camera.

2. Insert the battery into the chamber.

   

3. Snap the battery door closed.

   After you load a new battery into the camera,
   you need to reset the date and time.

Date and time imprinting

This camera has a quartz clock and automatic calendar through the year 2040. It uses the film's magnetic data-recording capability to record date and time information which the photo lab imprints on the back of your prints.

Setting the date and time

You can choose from three date formats: (month/day/year, day/month/year, or year/month/day) or time (hour/minute) with an LCD display of PM for past noon.

1. Press SELECT—
   1. time to select month/day/year,
   2. times to select day/month/year,
   3. times to select year/month/day, or
   4. times to select hour/minute.
2. Press SELECT again but hold until the first number for date or time "blinks."
3. Press ENTER to change the number.

   

4. Press SELECT to save the new number and move to the next blinking number.
5. Repeat steps 3 and 4 to continue the setting or repeatedly press SELECT to stop the blinking and to end your selection.

Previous |  Next

Main Table of Contents
Regulatory Information | Camera Identification | Camera Features | Getting Started | Other Battery Information | Loading Film | Taking Pictures | Flash & Picture-Taking Options | Using Self-Timer | Unloading Film | Caring for Camera | Troubleshooting | Specifications