Service & Support Main | DC215 Support | Owner's Manual Contents

KODAK DC215 Zoom Digital Camera
Running a Slide Show on Your Television

You can show your pictures to a large audience by connecting your camera to a television and running a slide show of the pictures stored on the camera memory card. To conserve batteries, use a Kodak-specified AC adapter.

1. Turn off your television and camera.
2. Insert the video cable into the video-out port on the side of your camera, and connect the other end of the video cable to the video-in port on the television.

   

3. Set the Slider switch to Review.
4. Turn on the camera and television.
5. Set the television to the correct channel setting.

   The pictures appear on the television.

   You may need to adjust the camera Video Out setting to NTSC or PAL television signals. See Adjusting the Video Out Signal for details.

6. To scroll through the pictures on the television, press the buttons.
7. Press the DO-IT button to start the slide show.

   The pictures changes every five seconds for a period of five minutes, unless you are using an AC adapter, in which case it runs indefinitely.

8. To stop Slide Show, press the DO-IT button.

Owner's Manual Contents
Main Table of Contents
Reviewing Your Pictures
Introduction | Viewing | Magnifying | Selecting for Printing | Cancelling for Printing | Deleting One or All | Television Slide Show